Marine Upholstery · Lake Lewisville · Flower Mound, TX
Lake Lewisville boat owners near Flower Mound are 40–50 minutes from our Fort Worth shop. Boat seat recovering, marine vinyl repair, pontoon seat upholstery, and full boat interior restoration — in-shop with a quote before work starts.
Lake Lewisville · Flower Mound TX Boat Upholstery
Lake Lewisville is one of the highest-use lakes in the DFW area. High use means more UV exposure, more spray, more heat cycles — and marine vinyl that degrades faster than on quieter lakes. We're about 40–50 minutes from Flower Mound and we do the work right, in-shop.
Marine-Grade Vinyl — Built for Lake Lewisville Conditions
Lake Lewisville boat owners deal with a long, intense season. We use UV-stabilized, mildew-resistant marine-grade vinyl on every job — the same spec OEM manufacturers use. Our marine upholstery in Fort Worth serves Lake Lewisville, Grapevine Lake, and the full north DFW lake corridor. Standard automotive vinyl isn't built for what this lake does to interior surfaces.
Foam Inspection Before Every Recovering Job
High-use lake boats absorb water into seat foam faster than most owners realize. We inspect the foam on every job before putting new vinyl over it. Waterlogged or compressed foam gets replaced — it doesn't get re-covered. This is what separates a recovering job that lasts from one that fails in two seasons.
Phone Estimate Available Before You Trailer In
For a 40–50 minute drive from Flower Mound, we're happy to look at photos and give a rough range over the phone before you commit to the trip. Call (817) 623-0589 with a description of your boat and any photos of the condition — we'll tell you what we think the scope looks like before you make the drive.
We're at 6925 E Lancaster Ave, Suite B, Fort Worth — about 40–50 minutes from Flower Mound via I-35W or TX-114. Call (817) 623-0589 to schedule your drop-off.
Marine Upholstery Services
Full-scope marine upholstery for Lake Lewisville boat owners near Flower Mound — every job in-shop at our East Lancaster Ave location in Fort Worth.
Boat Seat Recovering
Captain's chairs, helm seats, bench seating, and cockpit upholstery. Foam inspected before new vinyl goes on — waterlogged or degraded foam is replaced, not re-covered.
Marine Vinyl Repair
Cracked panels, split seams, and delaminating surfaces. We assess whether targeted repair or full recovering makes more sense and tell you that before any work begins.
Pontoon Seat Upholstery
Pontoon bench seating, lounge sections, and sun deck cushions. UV-stabilized marine vinyl rated for the direct sun and heavy use Lake Lewisville pontoon boats face all season.
Boat Cushion Repair
Swim platform pads, filler cushions, and custom foam replacements. Foam that's absorbed water or compressed gets fully replaced — not patched over with new vinyl.
Console & Helm Upholstery
Helm seat recovering, dashboard pad work, and console side panel upholstery. Material and stitch matched to your boat's existing interior for a clean, integrated result.
Boat Interior Restoration
Full interior restoration for Lake Lewisville boats with damage across multiple areas. One quote, one job, one timeline — your boat comes out complete, not in phases.
How It Works
The shop is 40–50 minutes from Flower Mound. Here's the full process — including what you can do before making the drive to get a head start on your quote.
Call or Book Online
Call (817) 623-0589 or use the booking link. Describe your boat's interior and send photos if you have them. We can give a rough phone estimate on many jobs before you make the drive from Flower Mound.
In-Shop Assessment & Quote
Bring your boat to 6925 E Lancaster Ave, Suite B in Fort Worth. We inspect the full interior — all upholstered surfaces — and give you a written quote before any work starts.
Upholstery Work
Work starts with your approval only. Timeline is confirmed at the quote stage. Lake Lewisville season is long — if you have a specific event or weekend in mind, tell us early so we can set accurate expectations on timing.
Pick Up and Back on the Water
We walk you through the completed work and give you care notes for the new marine vinyl under Lake Lewisville's UV and water conditions — our guide on protecting boat upholstery between recoveries covers the specifics. Your boat is ready to go back in the water.
Common Questions
How far is Flower Mound from your boat upholstery shop?
About 40–50 minutes from our shop at 6925 E Lancaster Ave, Suite B in Fort Worth. Flower Mound is in Denton County on the north side of DFW — via I-35W south or TX-114 west to Fort Worth. Lake Lewisville boat owners from Flower Mound make the drive regularly for in-shop marine upholstery work.
Do you work on Lake Lewisville pontoon boats?
Yes. Pontoon seat upholstery is one of our most common marine jobs. Lake Lewisville is one of the highest-use lakes in the DFW area — the combination of heavy boat traffic, direct sun, and Texas heat accelerates marine vinyl degradation. Pontoon interiors with large open seating areas are especially vulnerable.
Can I send photos to get a quote estimate before coming in?
Yes. Call (817) 623-0589 and describe your boat — or use the booking link and include photos. For a 40–50 minute drive from Flower Mound, getting a rough range over the phone before the trip makes sense. We can give realistic estimates from photos on most standard jobs.
What type of material do you use on boat seat upholstery?
UV-stabilized, mildew-resistant marine-grade vinyl on every job. Marine-grade is engineered for water exposure, direct Texas sun, and the temperature cycling a boat faces through a full DFW season. Automotive or furniture vinyl breaks down significantly faster under these conditions — we don't use it on marine work.
Do you inspect and replace boat seat foam when recovering?
Yes. Foam inspection is part of every recovering job. Lake Lewisville boats that have been in heavy use for multiple seasons often have foam that's absorbed water or compressed — even when the vinyl still looks acceptable from the outside. Compromised foam gets replaced before recovering. Putting new vinyl over bad foam doesn't produce a result that lasts.
What is the drive from Flower Mound to your Fort Worth shop?
About 40–50 minutes via I-35W south from Flower Mound toward Fort Worth, or TX-114 west. Our shop is at 6925 E Lancaster Ave, Suite B, Fort Worth, TX 76112. Most standard boat trailers access the property without clearance issues. Call (817) 623-0589 ahead of time to set up your drop-off.
Service Area
We serve boat owners throughout the DFW lake corridor from our Fort Worth shop. The north DFW corridor includes Lake Lewisville near Flower Mound and Grapevine Lake boat upholstery — all in-shop at East Lancaster Ave.
Flower Mound TX · Lake Lewisville · Fort Worth In-Shop
Call with a description of your boat — photos help us give a rough range before you make the drive from Flower Mound. Full written quote at the shop before any work starts.
Our full marine upholstery hub — boat seat recovering, pontoon interiors, marine vinyl repair, and console work for DFW lake boat owners including Lake Lewisville.
View Service →Tears, cracks, worn bolsters, and color loss on automotive leather. Assessed and repaired at our Fort Worth shop — same in-shop process, same material standards.
View Service →Custom-built leather and vinyl motorcycle saddle bags matched to your seat and hardware. Local drop-off or ship nationwide.
View Service →